Find the right SiteVision subscription for you

Trimble SiteVision Universal Subscription

Works with the Catalyst DA2 receiver or the SiteVision Integrated Positioning System

  • Trimble Catalyst for SiteVision
    Software based centimeter accuracy GNSS receiver on your device
  • Trimble Connect  Business
    Data management and collaboration
Monthly Annual

USD 308

A Single User Subscription
Valid for 1 Month

Get A Demo

Trimble SiteVision Mobile Subscription

Works alongside a separate Catalyst subscription

  • Trimble Connect Business
    Data management and collaboration
Monthly Annual

USD 145

A Single User Subscription
Valid for 1 Month

Get A Demo

Trimble SiteVision Specifications

Hardware Trimble SiteVision Integrated Positioning System Download Specs Trimble SiteVision for Trimble DA2
GNSS receivers Trimble Catalyst DA1 Antenna Trimble Catalyst DA2 GNSS System
GNSS position accuracy Hz: 1 cm + 1 ppm RMS | Vt: 2 cm + 1 ppm RMS
In Trimble RTX technology coverage:
Typically 10 – 20 cm in North America and Western Europe
Typically less than 50cm in the rest of the world
Hz: 1 cm + 1ppm RMS | Vt: 2cm + 1ppm RMS
Multi-frequency (L1/L2/L5 GNSS, GLONASS)In Trimble RTX technology coverage:
Hz: 2cm RMS | Vt: 5cm RMS
GNSS constellations GPS, GLONASS, Galileo, QZSS, SBAS, L-Band Satellite Corrections GPS L1,L2C, L5, GLONASS, L1C/A, L2C/A, Galileo E1, E5A, QZSS L1C/A, L2C, L5, Beidou B1, B2A, SBAS L1C/A, L2C, L5, NavIC (IRNSS) L5, L-Band Satellite Corrections
Supported correction formats RTCM 3.0, RTCM 3.1, RTCM 3.2, CMRx RTCM 3.0, RTCM 3.1, RTCM 3.2, CMRx
EDM/AR position accuracy Typical Hz: <20 cm rms at 10 m | Vt: <10 cm rms at 10 m (varies by phone model)  –
EDM distance measurement accuracy Typically ± 3 mm at -10 °C to +50 °C  –
EDM distance measurement range Typically 0.3 m – 25 m to fresh asphalt | Up to 100 m to white walls  –
EDM measuring time 0.1-4 seconds depending on surface, range & brightness  –
Power management Swappable batteries ~ 2.5 – 3 hours per battery (varies by phone model) Customer supplied USB battery pack. Operating hours depend on pack selected.
Dimensions Diameter: 135 mm | Height: 285 mm Diameter: 128 mm | Height: 55 mm
Recommended devices Samsung S20+, Samsung S10+, Samsung S9+, Samsung Note 9, Samsung Note 8, Google Pixel 4 XL Latest iPad Pro & iPhone Pro (with LiDAR sensors)
Minimum Operating System requirement Android™ 9 Android™ 9, iOS 13.0 or higher
Screen area Typically 100-110 cm2 phone Supports tablets typically up to 600 cm2
Weight <800gms (1.8 lbs)
SiteVision Integrated Positioning System with Samsung S20 Plus
GNSS 330gms (11.6 oz) + pole or handle and weight of user’s device
Operating temperature Typically -10°C to +35°C, (14°F to +95°F) varies by phone model Typically -10°C to +35°C, (14°F to +95°F) varies by phone/tablet model. GNSS operating temperature is -20°C to +60°C, (-4°F to +140°F)
Storage temperature range -20°C to +70°C (-4°F to +158°F) GNSS -40°C to +70°C (-40°F to +158°F). Phone varies by manufacturer
Humidity 95% non condensing 95% non-condensing
Ingress Protection IP65 IP65
Drop Drop 1.2 m (4’) Drop 1.2 m (4’)
User interface LED for power on, Bluetooth connection status, low battery warning LED for Bluetooth connection status
Software
Model placement Automatic with Georeferenced data | Measured (cm) | Manual | Marker
Supported formats Trimble: TRB, VCL, TTM, TMAP, SKP, Tekla
Open Source & Industry: IFC, LandXML, SHP, GDB, DWG, DXF, DGN, WFS, NWC, NWD, RVT, PDF
Connectivity (model data) Cellular or Wi-Fi
Connectivity (correction data) Cellular or Wi-Fi
L-band satellite for remote operations
Data interpretation User defined rules & 3D symbols
Measurement and recording functions Georeferenced photo, ToDo’s, Tasks, Points, Area, Grade, Distance, Cut/Fill
Measurement methods GNSS, EDM*, AR Model Measurement
Measurement modes Model point to model point | Ground point to model point | Ground point to ground point

* Applies only to iOS devices with LiDAR, or the Trimble SiteVision Integrated Positioning System

Frequently Asked Questions

Still looking for answers? View Our FAQs

“An excellent ‘survey-light’ tool for visualization of work planned and completed on a Stakeless Site”

Espen Dahl,

Zenith Surveys Norway

“The ability to load models accurately in the real world is a game changer”

Rob Bik,

Geometius Netherlands

“SiteVision makes complicated design data easy to understand for any user”

Aart van Driel,

Geonext Netherlands

“This is true collaboration!”

Jeff Yeo,

Lead 3D Pipe Designer, ONEC, Alberta, Canada

“SiteVision is easy to use, and it will make it easier for me to communicate designs in the field with my clients”

Mats Nyland,

NCC Norway

“SiteVision is a tool that I can immediately integrate into all of my projects”

Fredrik Bergström,

FMT Sweden